Care and Maintenance for Stereotaxics

As in other fine pieces of equipment, normal care and maintenance should be followed:

  • Do lubricate moving parts with light oil.
  • Do clean instruments with mild soap or zephrin.
  • Do store in dust free areas.
  • Do Not drop any portion of the apparatus as this may seriously disturb the calibration.
  • Do Not allow the instrument to accumulate blood, hair, dust or other foreign matter as this will disrupt movement and accuracy.
  • Do Not autoclave the equipment because this will severely damage bushing components. If sterilization is required, use gas or germicide, not to exceed 120°F (48°C)

Care and Maintenance for Micropositioners

  • Do lubricate moving parts with light oil.
  • Do clean instruments. Master and Slave Cylinder may be removed and submerged in alchohol for cleaning/sterilization purposes.
  • Do store in dust free areas.
  • Do refer to instruction Manual for additional information.
  • Do Not allow the instrument to accumulate blood, hair, dust or other foreign matter as this will disrupt movement and accuracy.
  • Do Not autoclave the equipment.
  • Do Not drop any portion of the apparatus as this may seriously disturb the calibration.

With the exception of optional accessories, which may be replaced by the customer and procedures listed in the Instruction Manual, all components including electronics are repairable by manufacturer only. Any attempt to service or repair unit will void manufacturer’s warranty. DO NOT OPEN UNIT. Refer to Instruction Manual for additional information.

Care and Maintenance for Pipette Pullers

As in other fine pieces of equipment, normal care and maintenance should be followed:

  • Do clean instruments by gently wiping exposed areas with mild soap or zephrin.
  • Do store in dust-free area.
  • Do refer to instruction Manual for additional information.
  • Do Not allow the instrument to accumulate blood, hair, dust or other foreign matter as this will disrupt movement and accuracy.
  • Do Not autoclave the equipmnet.
  • Do Not drop any portion of the apparatus as this may seriously disturb the calibration.
  • Do Not oil slide shaft.

With the exception of optional accessories, which may be replaced by the customer or procedures listed in the Instruction Manual, all components including electronics are repairable by manufacturer only. Any attempt to service or repair unit will void manufacturer’s warranty. DO NOT OPEN UNIT. Refer to Instruction Manual for additional information.